How to Make Resin Dice: Step-by-Step Guide India 2026

Direct Answer: How Do You Make Resin Dice?

To make resin dice, use a clean silicone dice mold, prepare dry inclusions, weigh resin and hardener accurately, mix slowly, pour into the mold without trapping air, release bubbles, cure fully, demold, sand the sprue mark, polish the faces, and fill the numbers if your mold creates engraved digits. ONE Resin is helpful for deeper dice molds up to 20 mm and longer working time, while 12H Resin is suitable for thin 8 mm layers, small shallow dice, and glossy finishing work.

What Resin Dice Are

A resin dice set is a group of cast resin dice, usually made for board games, tabletop role-playing games, display sets, gifts, or collectors. Dice can be standard six-sided cubes or multi-sided sets such as D4, D6, D8, D10, D12, and D20 depending on the mold. The challenge is not only making them beautiful; the dice must also cure properly, demold cleanly, and remain readable.

For Indian creators, dice are attractive because they use less resin than trays or boards, but still look premium when photographed well. They can be sold as gift sets, gamer accessories, desk collectibles, or custom colour-family sets without needing a large studio.

Difficulty And Timing

Difficulty rating: beginner to intermediate. Basic dice are beginner-friendly, but professional finishing takes patience because each face must be clean. Plan 20 minutes for mold cleaning and layout, 15-25 minutes for weighing and mixing, 10 minutes for pouring, 12-16 hours for full cure depending on resin choice, and 45-90 minutes for sanding, polishing, and number filling.

What Makes Dice Tricky

Dice molds have corners, narrow number details, and sprue openings where bubbles can hide. Small mistakes are easy to see on transparent dice. A rushed pour can leave missing corners, cloudy inclusions, tacky faces, or rough number cavities. The best dice makers work slowly and repeat the same clean process every time.

Choose The Right Resin And Mold

Before mixing ONE Resin or 12H Resin, inspect your dice mold and note the deepest point. Resin selection depends on the mold depth and the layer thickness. ONE Resin has a 3:1 resin to hardener ratio by weight, 120 minutes pot life, 20 mm maximum pouring thickness, 14-16 hours full cure, and 8-10 hours overcoat time. 12H Resin has a 2:1 resin to hardener ratio by weight, 40 minutes pot life, 8 mm maximum pouring thickness, 12-14 hours full cure, and 12 hours overcoat time.

Mold Types

Cap molds are popular because they form most dice shapes cleanly and allow extra resin to sit in the cap area. Sprue molds have a small opening where resin is poured, and they can make cleaner faces when handled well. For beginners, a good-quality silicone cap mold is usually easier because it gives access for bubble checking.

Product Fit Logic

Use ONE Resin when your dice mold depth is closer to a small cast object and you want more time to handle details, especially in warm Indian weather. Use 12H Resin for smaller, thinner dice or decorative layers that stay within 8 mm. Do not exceed the maximum pouring thickness of the resin you choose.

Inclusions For Dice

Begin with dry, lightweight inclusions such as tiny sealed paper shapes, small foil accents, dried micro-flowers, or clear decorative films. Avoid wet material, oily items, or anything large enough to disturb balance. Dice are small, so restraint looks more premium than overcrowding.

Materials, Costing, And Workspace Setup

Prepare the full setup before weighing ONE Resin or 12H Resin. Dice use small quantities, but the work is detailed. A clean table, good lighting, and a dust cover matter more than a large studio.

Materials List With INR Costs

You will need a silicone dice mold, resin and hardener, digital weighing scale, small mixing cups, pointed stir sticks, nitrile gloves, tweezers, toothpicks, dust cover, sandpaper from medium to fine grits, polishing cloth, number-filling paint or marker if required, and packaging. A basic dice mold in India may cost ₹250-₹900, while a full multi-sided set mold can cost ₹700-₹2,500 depending on quality.

Starter tool costs may include a scale for ₹350-₹900, gloves for ₹150-₹350, sanding sheets for ₹80-₹200, polishing supplies for ₹100-₹300, and small boxes or pouches for ₹20-₹80 per set. Per-set consumable cost can range from ₹80-₹250 depending on dice size, resin quantity, finishing materials, and packaging.

Batch Size And Ratio

Dice batches are usually small, but accuracy still matters. Use a digital scale and measure by weight. For ONE Resin, weigh 3 parts resin and 1 part hardener by weight. For 12H Resin, weigh 2 parts resin and 1 part hardener by weight. Keep total beginner batches well below 500 ml so the mix remains controlled.

India Climate Notes

Work between 18-32°C whenever possible. In summer cities such as Delhi, Jaipur, Ahmedabad, or Nagpur, mix during cooler hours. In monsoon cities such as Mumbai, Kochi, Chennai, and Kolkata, keep molds and inclusions dry because moisture can create cloudy dice or surface issues.

Step-By-Step Tutorial: Resin Dice

This workflow is suitable for small dice molds using ONE Resin or 12H Resin. Check the mold depth first and keep your pour within the correct product thickness.

Step 1: Clean The Mold

Remove lint and dust from the silicone mold using tape or a clean air blower. Inspect number cavities and corners. Any dust inside the mold can become permanently visible.

Step 2: Prepare Inclusions

Dry and seal any paper or botanical inclusions. Cut them smaller than you think you need. Dice have limited internal space, and large pieces can fold, float, or block corners.

Step 3: Weigh Resin And Hardener

Place the cup on the scale, tare to zero, and weigh according to the product ratio. Do not estimate. Accuracy is the foundation of a firm cure and clean finish.

Step 4: Mix Slowly

Stir slowly and scrape the sides and bottom of the cup. Small batches can still fail if unmixed material remains on the cup wall. Avoid whipping air into the resin.

Step 5: Fill Corners First

Use a toothpick or small stick to guide resin into corners and number details. This helps prevent missing points on D20 dice and rounded gaps on cube corners.

Step 6: Add Inclusions

Place inclusions carefully and push them below the surface only enough to position them. Avoid crowding the dice. Leave clear space around numbers and edges.

Step 7: Top Up The Mold

Slightly overfill cap molds according to mold design so curing shrinkage and cap pressure do not create voids. For sprue molds, keep the sprue reservoir filled as bubbles rise.

Step 8: Release Bubbles

Let the mold rest briefly, then remove visible surface bubbles. Use a toothpick for bubbles trapped near numbers. Do not stir inside the mold once the layout is set.

Step 9: Cure Fully

Cover the mold and cure at 18-32°C. ONE Resin reaches full cure in 14-16 hours. 12H Resin reaches full cure in 12-14 hours. Demolding early can distort edges or leave fingerprints.

Step 10: Sand, Polish, And Fill Numbers

Trim sprue marks carefully, sand progressively, polish, and fill number grooves if needed. Wipe away excess fill so the digits stay crisp. Package only after the dice are clean and fully dry.

Troubleshooting Resin Dice

Most dice problems come from trapped air, inaccurate weighing, or rushed finishing. Whether you use ONE Resin or 12H Resin, diagnose the visible symptom before remaking the set.

Common Problems

Missing corners usually mean air was trapped in the mold point. Sticky faces point to weighing or mixing errors. Cloudiness can come from moisture in inclusions or a damp workspace. Rough sprue marks are a finishing issue and can often be improved with careful sanding and polishing.

When To Start Over

Start over if dice remain soft after the full cure time, if number details are unreadable, if large bubbles affect play, or if inclusions make the dice visibly uneven. Sell only pieces that match the purpose you promise.

Quality Checklist

Check each die for firm cure, readable numbers, clean corners, smooth faces, no tacky areas, balanced visual design, and safe packaging. Photograph the set under soft light from several angles before listing it online.

Pricing And Selling Resin Dice In India

Dice made with ONE Resin or 12H Resin can be sold as gamer gifts, desk collectibles, board-game accessories, or display sets. Pricing should include material, labor, sanding time, failed pieces, packaging, and profit.

Pricing Formula

Use material cost + finishing labor + packaging + overhead + profit. If a small dice set costs ₹150 in consumables, ₹120 in labor, ₹40 in packaging, and ₹30 overhead, the base is ₹340. A selling price around ₹499-₹899 can be realistic depending on finish, number filling, photography, and customisation. Premium multi-sided sets may be priced higher.

Selling Channels

Try Instagram Reels, tabletop gaming communities, WhatsApp Business catalogues, Etsy India, exhibitions, comic and gaming events, local craft markets, and gift hampers. Short videos showing dice demolding, sanding, and number filling can build trust because buyers see the handmade process.

Packaging

Use soft pouches, small rigid boxes, or compartment boxes so dice do not scratch each other in transit. Add a care card and mention whether the dice are intended for display or regular play.

FAQ: Resin Dice India 2026

These answers apply to resin dice made with ONE Resin and 12H Resin. Always measure by weight and respect the current pouring thickness for the resin you choose.

1. Can beginners make resin dice?

Yes. Start with a simple D6 mold or a beginner cap mold, then practice sanding and number filling before selling.

2. Which resin is better for resin dice?

ONE Resin is useful for deeper dice molds up to 20 mm and longer working time. 12H Resin works for thinner 8 mm layers or shallow decorative dice work.

3. Why do my dice have missing corners?

Missing corners usually come from trapped air. Guide resin into corners with a toothpick and keep the sprue or cap area properly filled.

4. How long should resin dice cure?

ONE Resin reaches full cure in 14-16 hours. 12H Resin reaches full cure in 12-14 hours when cured in suitable conditions.

5. Can I sell handmade resin dice in India?

Yes, but sell only cleanly cured, readable, well-finished dice. Be clear whether they are for play, display, gifting, or collection.

6. How much should resin dice cost in India?

Simple handmade dice sets may sit around ₹499-₹899, while premium multi-sided or custom display sets can be higher depending on labor and packaging.

7. Do resin dice need polishing?

Most dice need at least sprue sanding and polishing. A glossy mold reduces work, but finishing is still important for a professional feel.

8. Can I embed flowers in dice?

Yes, but use tiny fully dried and sealed pieces. Fresh or damp flowers can cause bubbles, cloudiness, and staining.

Conclusion: Small Project, Serious Precision

Resin dice are small, but they teach serious discipline: measurement by weight, bubble control, mold handling, cure timing, sanding, polishing, and product honesty. Choose ONE Resin for deeper dice up to 20 mm and longer working time, or 12H Resin for thin 8 mm layers and glossy finishing work.

Explore Magnifico Resins for resin systems and practical guidance designed for Indian resin artists. Start with one clean practice set, record your weights and cure conditions, and build a repeatable dice-making process before taking custom orders.