How to Make Resin Wall Panels: Large Format Guide India 2026
Resin wall panels are large-format art pieces that can transform homes, studios, cafes, salons, offices, and gifting catalogues. This guide from Magnifico Resins explains how Indian resin artists can make wall panels with proper base preparation, accurate measurement by weight, safe layer planning, realistic INR costing, and correct product selection between ONE Resin and 12H Resin.
Direct Answer: How Do You Make Resin Wall Panels?
To make a resin wall panel, choose a rigid base, seal it, level the work surface, weigh resin and hardener accurately, pour in controlled layers, guide the design, release bubbles, cure dust-free, finish the edges, attach hanging hardware, and test the panel before delivery. ONE Resin suits medium-thickness sections up to 20 mm and gives a long 120-minute pot life. 12H Resin suits thin layers up to 8 mm and glossy coating work for panels.
What A Resin Wall Panel Is
A resin wall panel is a decorative resin artwork made on a solid base or inside a shallow framed structure. It may be abstract, floral, ocean-inspired, marble-inspired, neutral, or brand-themed. Unlike a small coaster, a wall panel must stay flat, hang safely, and look clean from a distance and close up.
For Indian creators, wall panels can serve premium home decor, housewarming gifts, interior designer projects, festive catalogues, boutique displays, and office art. They also make strong portfolio pieces because they show scale, surface control, and finishing skill.
Difficulty And Timing
Difficulty rating: intermediate to advanced. Large surfaces magnify dust, bubbles, tilt, and uneven edges. Plan 1-2 hours for base preparation, 20-40 minutes for weighing and mixing, 20-45 minutes for pouring and movement, 12-16 hours for full cure depending on resin, and 1-2 hours for edge finishing, back cleaning, hardware, photography, and packing.
Why Large Format Needs Planning
Large panels use more material and have less tolerance for rushed decisions. A small mistake on a pendant may be acceptable; a tilted 60 cm panel can waste expensive material. Always make a sample tile before a paid wall panel, especially when using new inclusions, a new base, or a new size.
Choose The Base, Resin, And Layer Thickness
Before mixing ONE Resin or 12H Resin, decide your base size, base material, resin layer thickness, and hanging method. ONE Resin has a 3:1 resin to hardener ratio by weight, 120 minutes pot life, 20 mm maximum pouring thickness, 14-16 hours full cure, and 8-10 hours overcoat time. 12H Resin has a 2:1 resin to hardener ratio by weight, 40 minutes pot life, 8 mm maximum pouring thickness, 12-14 hours full cure, and 12 hours overcoat time.
Base Options
Common bases include MDF, plywood, sealed wood panels, acrylic sheets, and framed shallow panels. For wood-based panels, keep the surface dry, clean, and sealed. If using teak, sheesham, mango, or acacia accents, wood moisture should be below 12% before resin contact. A weak or flexible base can warp during cure.
Product Fit
Use ONE Resin for thicker sections, embedded details, raised areas, or layered depth up to 20 mm. Use 12H Resin for thin glossy surface coats and shallow decorative layers up to 8 mm. A wall panel is usually broad rather than deep, so many designs use thin layers, but the correct product still depends on the thickest point of the pour.
| Panel Decision | Recommended Choice | Reason |
|---|---|---|
| Raised depth up to 20 mm | ONE Resin | Longer pot life and suitable medium thickness. |
| Thin glossy coat up to 8 mm | 12H Resin | High gloss finish for shallow layers. |
| Wood base | Seal before pour | Reduces bubbles and moisture issues. |
| Paid commission | Sample tile first | Confirms finish before large material use. |
Design Direction
For Indian interiors, strong wall panel styles include neutral marble looks, coastal blues for Goa-inspired homes, floral panels for bedrooms, earthy wood-and-clear panels for study rooms, and minimal office panels for corporate gifting. Keep the design aligned with the room where it will hang.
Materials, Costing, And Workspace Setup
Large-format work needs a complete setup before ONE Resin or 12H Resin is mixed. Prepare the base, level table, dust cover, edge tape, support blocks, and packaging plan before the resin clock starts.
Materials List With INR Costs
You may need a rigid panel base, primer or sealer, resin and hardener, digital weighing scale, mixing cups, stir sticks, gloves, spreader, edge tape, support blocks, level tool, dust cover, sandpaper, polishing cloth, hanging hardware, corner protection, and shipping carton. Optional inclusions include dried botanicals, sealed prints, shells, fabric, or wood accents.
Approximate India setup costs: panel base ₹200-₹1,500 depending on size, sealer ₹150-₹500, digital scale ₹350-₹900, mixing tools ₹150-₹400, sanding supplies ₹100-₹300, hanging hardware ₹50-₹250, and packaging ₹200-₹800 for larger panels. Material cost for a finished panel can range widely from ₹700 for a small piece to ₹4,000 or more for large commissioned work.
Batch Size And Resin Estimate
Keep beginner batches under 500 ml. For large panels, mix multiple controlled batches instead of one oversized cup. Estimate resin from panel length, width, and planned layer thickness, then measure the resin and hardener by weight. For ONE Resin, use 3 parts resin and 1 part hardener by weight. For 12H Resin, use 2 parts resin and 1 part hardener by weight.
Climate Control In India
Cure between 18-32°C. In 35-40°C summer heat, work during cooler hours and avoid direct sunlight on the panel. During monsoon in Mumbai, Kochi, Kolkata, Chennai, and Goa, protect bases and inclusions from humidity. Moisture can create cloudy areas, bubbles, and weak bonding.
Large Panel Warning
Do not pour a large wall panel on an unlevel table. A small tilt can move the resin, thin one edge, flood another edge, and make the final panel harder to finish.
Step-By-Step Tutorial: Resin Wall Panel
This method works for large-format resin panels using ONE Resin for medium-depth areas or 12H Resin for thin glossy coats. Keep every layer within the current product limit.
Step 1: Choose And Inspect The Base
Select a rigid base that does not flex. Check corners, surface dents, and back side. Sand rough areas and remove dust before sealing.
Step 2: Seal The Surface
Seal wood, MDF, paper, or fabric areas and let them dry fully. Sealing reduces air release and helps the resin sit cleanly on the panel.
Step 3: Level The Work Area
Place the panel on support cups or blocks and use a level tool. Check left-right and front-back. Recheck after adding edge tape or frame supports.
Step 4: Tape And Protect Edges
Tape the underside and edges where drips may form. Decide whether you want a clean contained edge or a flowing edge before pouring.
Step 5: Weigh Resin And Hardener
Use a digital scale and measure by weight. ONE Resin uses 3:1 resin to hardener by weight. 12H Resin uses 2:1 resin to hardener by weight.
Step 6: Mix Slowly
Mix slowly, scrape the cup base and sides, and avoid whipping in air. Large panels show bubbles clearly, so calm mixing matters.
Step 7: Pour In Zones
Pour resin in zones rather than dumping everything at the center. This gives better control over flow, coverage, and edge management.
Step 8: Move The Design
Use a spreader or gloved hand only where needed. Avoid overworking the surface because too much movement can muddy the design and introduce dust.
Step 9: Release Bubbles And Cover
Let bubbles rise, remove them with your preferred resin-safe method, then cover the full panel with a clean dust cover. Keep pets, fabric, hair, and fans away.
Step 10: Cure, Finish, And Add Hardware
ONE Resin reaches full cure in 14-16 hours. 12H Resin reaches full cure in 12-14 hours. After cure, remove tape, sand sharp edges, polish, clean the back, and attach hanging hardware rated for the panel weight.
Troubleshooting And Quality Control
Even with ONE Resin or 12H Resin, large wall panels can fail from dust, tilt, poor sealing, or rushing. Inspect under side light before delivery.
Common Problems
Uneven thickness usually means the table was not level. Bubbles near wood mean the base needed better sealing. Sticky zones point to weighing or mixing errors. Dust marks come from uncovered cure or a dirty workspace. Edge drips are normal but should be trimmed and finished neatly.
When To Repair
Small dust marks or dull areas may be corrected with sanding and a prepared overcoat if timing and surface preparation are right. A warped base, uncured panel, or badly tilted design is usually not suitable for sale.
Final Checklist
Check flatness, back cleanliness, hanging hardware strength, finished edges, full cure, surface clarity, bubble control, and packaging safety. Photograph the panel vertically and in a styled room setting so buyers understand scale.
Pricing And Selling Resin Wall Panels In India
Wall panels made with ONE Resin or 12H Resin should be priced as decor products, not small crafts. Count material, base, labor, wastage, packaging, hardware, photography, delivery risk, and profit.
Pricing Formula
Use material cost + base cost + labor + overhead + packaging + profit. If a medium panel costs ₹1,500 in materials, ₹500 for base and hardware, ₹1,500 labor, ₹400 packaging, and ₹300 overhead, the base is ₹4,200. A selling price around ₹6,000-₹10,000 can be realistic depending on size, finish, customisation, and buyer segment.
Selling Channels
Use Instagram, WhatsApp Business, Etsy India, local exhibitions, interior designers, decor boutiques, cafes, salons, and corporate gifting vendors. Build a portfolio with size, price range, delivery city, and installation notes.
For custom commissions, collect wall size, room photos, colour preference, deadline, delivery city, and installation expectations before quoting. Large panels need clear communication because shipping and hanging hardware affect the final experience.
Shipping And Installation
Wrap the surface, protect corners, use rigid board support, and choose courier packaging based on size. For valuable commissions, local delivery or buyer pickup may be safer than standard courier.
FAQ: Resin Wall Panels India 2026
These answers apply to wall panels made with ONE Resin and 12H Resin. Always measure by weight and keep every pour within the current thickness limit.
1. Can beginners make resin wall panels?
Beginners should start with small panels first. Large wall panels need level curing, dust control, and confident pouring.
2. Which resin is better for wall panels?
ONE Resin works for thicker areas up to 20 mm. 12H Resin works for thin glossy layers up to 8 mm.
3. Why did my wall panel cure unevenly?
The table may not have been level, the base may have flexed, or the resin layer may have been uneven.
4. Can I pour over wood?
Yes, but seal the wood first and keep wood moisture below 12% before resin contact.
5. How much should resin wall panels cost in India?
Small panels may start lower, while medium custom panels can often sit around ₹6,000-₹10,000 or more depending on size and finish.
6. Do wall panels need hanging hardware?
Yes. Use hardware rated for the finished panel weight and test it before delivery.
7. What causes bubbles in large panels?
Common causes include unsealed bases, fast mixing, dusty surfaces, and air trapped around inclusions.
8. Can I ship resin wall panels across India?
Yes, but packaging must protect the surface and corners. For large or expensive panels, local delivery can be safer.
Conclusion: Scale Up With Control
Resin wall panels are exciting because they let Indian artists create premium decor, but scale demands discipline. Choose ONE Resin for medium-depth sections up to 20 mm or 12H Resin for thin 8 mm glossy layers, measure by weight, seal the base, level the table, and finish the back and edges professionally.
Explore Magnifico Resins for resin systems and practical guidance for Indian makers. A wall panel becomes sellable when it is not only beautiful, but flat, cured, hangable, and packaged for real homes.
Scale-Up Tip
Before making a large commissioned panel, make a 15 cm sample tile with the same base and resin plan. It is the cheapest way to confirm colour, cure, flow, and client approval.
