Resin nameplates have become extremely popular in India — from modern apartment doors to office cabins, studios, and boutiques. They offer a premium, glossy finish, endless design possibilities, and excellent durability compared to acrylic or wooden boards.
This step-by-step guide will teach you how to make resin nameplates for both home and office use, even if you’re a beginner
What You’ll Need to Make Resin Nameplates
Materials Checklist
- One Resin (best all-purpose choice)
- Ultra Clear Casting Resin (for thick letters or deep moulds)
- Silicone alphabet moulds or base mould
- MDF / acrylic / wooden base (optional)
- Vinyl letters or acrylic cut letters
- Pigments / metallic powders / flakes
- Gold leaf or glitter (optional)
Tools Checklist
- Mixing cups
- Wooden stir sticks
- Gloves
- Heat gun or mini torch
- Level surface
- Masking tape
- Sandpaper (400–1000 grit)
Which Resin Is Best for Nameplates?
One Resin — Best Overall for Nameplates
- Smooth glossy finish.
- Easy handling
- Works for coating & shallow casting
- Strong adhesion to wood & acrylic
Ultra Clear Casting Resin — For Thick Letter Moulds
- Perfect for deep alphabets
- Bubble-free clarity
- Slow cure → sharp edge
- For most home & office nameplates, One Resin is ideal
Step-by-Step: How to Make a Resin Nameplate
Step 1: Prepare the Base
- Clean the surface (wood/acrylic/MDF)
- Sand lightly for better adhesion
- Tape the edges to prevent overflow
Step 2: Arrange Letters
- Place acrylic or vinyl letters
- Check spelling and spacing
- Fix temporarily using glue dots
Step 3: Mix the Resin
- Measure resin accurately
- Mix slowly for 3–5 minutes.
- Scrape sides and bottom
Step 4: Add Colour & Effects
- Add pigments or metallic powder
- Mix gently
- Avoid over-pigmenting
Step 5: Pour the Resin
- Pour slowly from one corner
- Use a spatula to spread evenly
- Avoid pouring too thick
Step 6: Remove Bubbles
- Use heat gun lightly
- Do not overheat
- Pop corner bubbles with toothpick
Step 7: Cure Properly
- Cover with dust protector
- Cure at 24–28°C
- Leave undisturbed for 24 hours
Popular Resin Nameplate Design Ideas
✔ White base + gold metallic letters
✔ Black marble resin with gold flakes
✔ Transparent resin with embedded flowers
✔ Wood base with clear resin topcoat
✔ Office plates with minimalist fonts
✔ Apartment nameplates with family names
Common Mistakes & How to Avoid Them
❌ Resin overflow
✔ Tape edges properly
❌ Crooked letters
✔ Measure spacing before pouring
❌ Cloudy finish
✔ Avoid humidity & mix slowly
❌ Sticky surface
✔ Maintain correct ratio & curing temperature